Accessories
Use assist bars to retract the thrust ring into the nut body after production and before removing the clamp. The assist bar also helps remove nuts on sticky arbors while preventing hammering or other costly damage to clamps.
See nut operating instructions for more information on using Amtec assist bars.
Assist Bar | Used for Amtec Nuts |
---|---|
801.101.125.065 | K-7.101L to K-7.202L |
801.101.128.095 | K-6.104 to K-6.206L |
K-7.103L to K-7.206L | |
801.101.200.127 | F-8.405 to F-8.1011 |
F-9.405 to F-9.1011 | |
K-6.107L to K-6.211L | |
K-7.107L to K-7.410L | |
H-2.405 to H-2.1011 | |
H-3.405 to H-3.1011 | |
801.101.280.127 | F-8.412 to F-8.1015 |
F-9.412 to F-9.1015 | |
K-6.212L to K-6.215L | |
H-2.412 to H-2.1015 | |
H-3.412 to H-3.1015 | |
801.101.203.190 | F-8.415.5 to F-8.1016.1 |
F-8.411.017 to F-8.1015.517 | |
F-9.415.5 to F-9.1016.1 | |
F-9.411.017 to F-9.1015.517 | |
K-6.216L to K-6.217L | |
H-2.415.5 to H-2.1016.1 | |
H-3.415.5 to H-3.1016.1 | |
801.101.305.190 | F-8.417.0 to F-8.1019.5 |
F-9.417.0 to F-9.1019.5 | |
F-8.417.017 to F-8.1019.517 | |
F-9.417.017 to F-8.1019.517 | |
H-2.417.0 to H-2.1019.5 | |
H-3.417.0 to H-3.1019.5 | |
GX-4.415.5 to GX-4.1018 | |
GX-5.415.5 to GX-5.1018 | |
801.101.360.190B | F-8.1020.0 to F-8.1023.0 |
F-8.420.017 to F-8.1020.107 | |
F-9.1020.0 to F-9.1023.0 | |
F-9.420.017 to F-9.1023.017 | |
H-2.1020.0 to H-2-1023.0 | |
H-3.1020.0 to H-3.1023.0 | |
GX-4.1019 to GX-4.1025 | |
GX-5.1019 to GX-5.1025 |